The correct way to use the spring brake chamber

The spring brake chamber is a part of the car, so for the safety of driving and preventing the occurrence of malfunctions, we cannot ignore the daily maintenance and maintenance. Then we will introduce the correct way to use it for everyone. Method.
The spring brake chamber is generally installed on the rear axle of the car in the rear direction. In order to ensure its usability, it is best to put the hand brake valve handle to the unbrake position during the operation, that is, to the spring brake. The dynamic chamber is filled with air pressure, so that it is easier to tighten and release the brake bolt. It is very dangerous to disassemble the spring brake chamber. Do not dismantle it blindly to prevent the big spring from jumping out and hurting people. If it must be disassembled, it should be carried out under the guidance of industry insiders. There is also that the installation should be installed in accordance with the product's instruction manual, so that no errors will occur. The last point is that we should regularly check the working conditions during the use process and perform regular maintenance, so that we can guarantee our products. Longevity, give full play to the greatest advantage.

www.chinafuao.net