What is the method for repairing corrosion on the surface of the brake cylinder?

In our automobile industry, we should always observe the surface of the automobile cylinder. If corrosion is found, we must adopt appropriate methods to control it. Today, let us understand the repair methods of brake cylinder manufacturers:
1. Surface treatment: In order to remove the surface oxidation thoroughly, we should use specially selected acetone to clean the surface, remember to clean regularly.
2. Reconcile materials: We should strictly follow the relevant ratio when we make the material ratio, and stir it evenly until there is no color difference.
3. Smearing materials: When applying, we must apply carefully, first do the primer work, ensure that the bonding and complete coverage, and then apply the material evenly to the repair surface to reach the required repair thickness.
4. Curing: The brake cylinder manufacturer also needs to tell everyone that it is also very important to do a good job of curing the surface. Every time the material temperature increases by 11°C, the curing time is reduced by half.
The brake cylinder manufacturer tells you how to repair the surface, and I hope you will be prepared for the repair, so that our cars can be used more smoothly and the damage of vehicle parts can be reduced.